[Next] [Up] [Previous] [Index]

The RED Machine

A rotor machine usually uses a disk with 26 contacts arranged in a circle on each side. When the rotor moves, the contacts on both sides of it advance.

A rotor which had 26 contacts in a circle on one side, and a spindle with 26 contact strips on the other side, is always sure, when it moves, to take each letter to a different substitute. Such a rotor is called a half-rotor, and the Hagelin B-211, which we will meet later, uses such rotors as well.

The Japanese cipher machine which was codenamed RED by American codebreakers behaved as if it consisted of two half-rotors, one with 20 contacts for 20 consonants, and one with 6 contacts for 6 vowels, counting Y as a vowel. This property allowed encrypted text to be pronounceable, thus allowing use of the commercial telegraph system.

This division of the alphabet was perpetuated in the PURPLE machine, which was a weakness of that machine, although it at least had a plugboard so that the six letters handled by themselves could be any six letters.

Also, while American codebreakers built their own RED work-alikes that really did have two half-rotors, the actual machine used by the Japanese had only one half-rotor; the spindle had all 26 strips, and the wheel face had two sets of 60 contacts, one wired with the same scramble of 20 characters repeatedly, and the other wired with the same scramble of the other 6 characters repeatedly.

The 60-contact wheel usually moved one step for each character enciphered, but not always. Its motion was controlled by a 47-position gear or pinwheel. Only eleven of the teeth could be disabled, including four adjacent pairs of teeth.

When an enabled tooth is active, the rotor advances one position for the letter currently enciphered.

When a disabled tooth is encountered, the rotor also advances one position, but the 47-position gear continues to advance for the current letter. Thus, occasionally the rotor will move two or even three positions when a letter is enciphered, but it will always move exactly 47 positions for each cycle of the 47-position gear. That cycle will take less than 47 letters, one less for every disabled tooth.


[Next] [Up] [Previous] [Index]

Next
Chapter Start
Table of Contents
Home Page